|
| |
TM 9-2320-364-34-4
21-26
21-3. TURBOCHARGER ASSEMBLY REPAIR (CONT).
(14)
Position center housing (6) in soft-jaw vise
and remove four screws (15) from center
housing (6).
(15)
Remove backplate (3) from center
housing (6).
(16)
Remove sleeve spacer (16) from
backplate (3).
(17)
Remove and discard two seal rings (17) from
sleeve spacer (16).
(18)
Remove and discard seal ring (18) from
center housing (6).
(19)
Remove connector (19) from center
housing (6).
(20)
Remove three screws (20) from thrust
washer bearing (21).
(21)
Remove and discard shaft collar (22) and
thrust washer bearing (21) from center
housing (6).
(22)
Remove and discard bearing (23) and
washer (24) from center housing (6).
Use care when removing
retaining rings. Retaining rings
are under tension and can act as
projectiles when released
causing injury to personnel.
(23)
Remove and discard retaining ring (25)
from center housing (6).
|
