|
| |
TM 9-2320-364-34-4
22-3
a.
Disassembly.
(1)
Position pump body (1), gear side down, on
clean work surface.
Use extreme care when
removing retaining rings.
Retaining rings are under
tension and can act as projectiles
when released suddenly and
could cause severe eye injury.
(2)
Remove retaining ring (2), pump cover (3)
and preformed packing (4) from pump
body (1). Discard preformed packing.
(3)
Remove locknut (5) and washer (6) from
shaft (7). Discard locknut.
(4)
Using puller and with the aid of an assistant,
hold pump gear (9) and remove impeller (8)
from shaft (7). Discard impeller.
(5)
Place pump body (1), gear (9) side up, on
work surface.
(6)
Turn pump gear (9) until ends of retaining
ring (10) can be seen.
Use extreme care when
removing retaining rings.
Retaining rings are under
tension and can act as projectiles
when released suddenly and
could cause severe eye injury.
(7)
Move retaining ring (10) from groove in
pump body (1).
(8)
Position pump body (1) in press.
|
