|
| |
TM 9-2320-364-34-4
22-7
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
(8)
Coat outside of water seal (6) with adhesive.
(9)
Position water seal (6) small side facing up,
in water pump body (5).
(10)
Install water seal (6) in water pump body (5)
using water pump installer.
NOTE
Pump body is positioned in press
with larger opening facing down.
(11)
Position pump body (5) in press.
When installing shaft, ensure
shaft assembly is installed
straight in pump body or shaft
assembly and pump body may be
damaged.
(12)
Install shaft (3) in pump body (5) by
pressing on outer race of larger bearing (1).
(13)
Remove pump body (5) from press.
|
