|
| |
TM 9-2320-364-34-4
23-7
Materials/Parts
Sealing Compound (Item 53, Appendix B)
Sealing Compound (Item 56, Appendix B)
Solvent, Drycleaning (Item 68, Appendix B)
Gasket (Item 60, Appendix E)
Gasket (Item 62, Appendix E)
Screw (23) (Item 523, Appendix E)
This task covers:
a. Removal
c. Installation
b. Cleaning/Inspection
d. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Transmission installed on stand, (Para 23-2)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Compressor Unit, Air (Item 35, Appendix F)
Gloves, Chemical Oil Protective
(Item 81, Appendix F)
Goggles, Industrial (Item 83, Appendix F)
Gun, Airblow (Item 86, Appendix F)
Wrench Set, Socket 3/8 in. Drive
(Item 273, Appendix F)
Wrench Set, Socket 3/8 in. Drive
(Item 274, Appendix F)
Wrench, Torque (0-175 lb-ft [0-237 N.m])
(Item 276, Appendix F)
Wrench, Torque (0-60 N.m)
(Item 277, Appendix F)
23-3. TRANSMISSION OIL PAN AND GASKET REPLACEMENT.
Tools and Special Tools
Wrench, Torque (0-600 lb-ft [0-814 N.m])
(Item 278, Appendix F)
a.
Removal.
(1)
Position transmission (1) so oil pan (2) faces
upward.
(2)
Remove plug (3), plug (4), gasket (5) and
plug (6) from oil pan (2). Discard gasket.
NOTE
Perform Step (3) if oil pan is
equipped with a corner drain
plug.
(3)
Remove plug (7) and gasket (8) from oil pan
(2). Discard gasket.
(4)
Remove 23 screws (9) and oil pan (2) from
transmission (1). Discard screws.
(5)
Remove and discard oil pan gasket (10)
from oil pan (2) or transmission (1).
|
