| |
TM 9-2320-364-34-4
23-11
Materials/Parts
Tags, Identification (Item 72, Appendix B)
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Internal oil filter removed, (Para 23-4)
Tools and Special Tools
Tool Kit, General Mechanics
(Item 240, Appendix F)
Wrench Set, Socket 3/8 in. Drive
(Item 273, Appendix F)
Wrench, Torque (0-60 N.m)
(Item 276, Appendix F)
23-5. TRANSMISSION LOW OIL SENSOR ASSEMBLY REPLACEMENT.
a.
Removal.
NOTE
Tag and mark wire and
connectors prior to removal.
(1)
Remove two connectors (1) from oil
pressure switch (2).
(2)
Remove oil pressure switch (2) from oil
sensor body (3).
(3)
Remove low oil sensor tube assembly (4)
from elbow (5) and fitting (6).
(4)
Remove two screws (7), washers (8) and
low oil sensor body (3) from bracket (9).
(5)
Remove screws (10), (11) and (12) and
bracket (9) from transmission (13).
NOTE
Note position of fittings prior to
removal.
(6)
Remove fitting (6) from elbow (14).
(7)
Remove elbow (14) from transmission (13).
(8)
Remove elbow (5) from low oil sensor
body (3).
|