|
| |
TM 9-2320-364-34-4
23-37
e.
Installation.
(1)
Position transmission so control valve (10) faces upward.
NOTE
Control valve and separator plate are installed as one assembly.
(2)
Position control valve (10) and separator plate (6) on transmission (11) with five screws (7), screw (8)
and screw (9).
(3)
Position front plate (3) to separator plate (6) with eight washers (5) and screws (4).
(4)
Position oil baffle (2) on front plate (3) with two screws (1).
(5)
Tighten screws in sequence shown to 96 to 144 lb-in (11 to 16 N.m).
f.
Follow-On Maintenance:
Install solenoid and wiring harness, (Para 23-8).
END OF TASK
|
