|
| |
TM 9-2320-364-34-4
20-7
NOTE
If equipped with a 145 AMP
alternator perform Steps
(25) through (36).
If equipped with a 200 AMP
alternator, perform Steps
(37) through (52).
There may be more than one
wire located on negative
terminal. Remove only wire
1815 and position remaining
wires back on negative
terminal.
(25)
Remove nut (46), lockwasher (47) and
wire 1815 (48) from negative terminal (49).
Reinstall nut (46) on negative terminal (49).
Discard lockwasher.
NOTE
There is a capacitor and possibly
more than one wire located on
positive terminal. Remove only
wire 1820 and position remaining
capacitor and/or wire back on
positive terminal.
(26)
Remove nut (50), lockwasher (51) and
wire 1820 (52) from positive terminal (53).
Reinstall nut (50) on positive terminal (53).
Discard lockwasher.
NOTE
There is a capacitor and possibly
more than one wire located on
F-positive terminal. Remove only
wire 1953 and position
remaining capacitor and/or wire
back on F-positive terminal.
(27)
Remove nut (54), lockwasher (55) and
wire 1953 (56) from F-positive terminal (57).
Reinstall nut (54) on F-positive
terminal (57). Discard lockwasher.
(28)
Remove STE/ICE-R alternator harness (58)
from engine block (12).
CAPACITOR
CAPACITOR
|
