|
| |
TM 9-2320-364-34-4
24-31
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(12)
Apply sealing compound on front
housing (33) around openings for bearing
cap (84) and bearing cap (80).
(13)
Coat threads of 12 screws (82) and (78) with
sealing compound.
(14)
Install bearing cap (84) on front
housing (33) with six lockwashers (83) and
screws (82). Tighten screws to 60 lb-
ft (81 N.m).
(15)
Install bearing cap (80) on front
housing (33) with six lockwashers (79) and
screws (78). Tighten screws to 60 lb-ft
(81 N.m).
NOTE
Perform Steps (16) through (18)
if pipe plug or dowel pins were
removed.
(16)
Coat threads of pipe plug (77) with sealing
compound.
(17)
Install pipe plug (77) in differential
housing (59).
(18)
Install two dowels (76) and (70) in
differential housing (59).
33
82
83
84
78
79
80
|
