|
| |
TM 9-2320-364-34-4
24-73
Materials/Parts
Sealing Compound (Item 54, Appendix B)
Solvent, Drycleaning (Item 68, Appendix B)
This task covers:
a. Disassembly
c. Assembly
b. Cleaning/inspection
d. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Center shaft removed from transfer case,
(Para 24-8)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Compressor Unit, Air (Item 35, Appendix F)
Eyes, Lifting (Item 58, Appendix F)
Gloves, Chemical Oil Protective
(Item 81, Appendix F)
Goggles, Industrial (Item 83, Appendix F)
Gun, Airblow (Item 86, Appendix F)
Press, 60 Ton (Item 164, Appendix F)
Wrench, Torque (0-175 lb-ft [0-237 N.m])
(Item 277, Appendix F)
Lifting Device, Minimum Capacity 145 lbs
(66 kg)
24-13. CENTER SHAFT REPAIR.
a.
Disassembly.
Center shaft assembly weighs
145 lbs (66 kg). Use suitable
lifting device to prevent possible
injury to personnel.
(1)
Remove two screws (1) and drive
coupling (2) from shaft gear (3).
(2)
Attach lifting device to shaft gear (3) and
position in press.
(3)
Remove bearing (4) from shaft gear (3).
(4)
Remove bearing (5) from shaft gear (3).
(5)
Remove shaft gear (3) from press.
(6)
Remove lifting device from shaft gears (3).
|
