|
| |
TM 9-2320-364-34-4
24-80
24-14. UPPER SHAFT REPAIR (CONT).
c.
Assembly.
(1)
With the aid of an assistant, position upper
shaft (1) in press.
(2)
Install gear spacer (15) on spline end of
upper shaft (1).
(3)
Coat two caged rollers (13) with grease.
(4)
Install one caged roller (13) , bearing
spacer (14) and second caged roller (13) on
spline end of upper shaft (1).
(5)
Coat mating surfaces of gear (12) and
bearing spacer (11) with grease.
NOTE
Install toothed shoulder of gear
on upper shaft first.
(6)
Install gear (12) and bearing spacer (11) on
upper shaft (1).
Assembled portion of upper
shaft assembly weighs 80 lbs (36
kg). Use an assistant to prevent
possible injury to personnel.
Press on inner diameter of
bearing or damage to equipment
may result.
(7)
Using press, install bearing (10) and bearing
spacer (9) onto upper shaft (1).
|
