|
| |
TM 9-2320-364-34-4
25-15
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(4)
Coat first three threads of air brake chamber
(9) with sealing compound.
NOTE
If installing a new air brake
chamber, the air brake chamber
must be caged before it can be
installed.
(5)
Install air brake chamber (9) into brake
assembly (11) until air brake chamber
bottoms out in brake assembly.
Air brake chamber can only be
unscrewed a maximum of one
turn. Otherwise, incorrect brake
operation could result.
(6)
Rotate air brake chamber (9) to align air
ports.
(7)
Using spanner wrench, tighten collet nut
(10) to 250 to 280 lb-ft (339 to 380 N.m).
|
