|
| |
TM 9-2320-364-34-4
25-18
25-6. AXLE NO. 1, 2 AND 5 PLANETARY HUB GEAR REPLACEMENT (CONT).
(5)
Remove end cap (9) from sun gear (10).
(6)
Position jet extractor between teeth of sun
gear (10) and teeth of ring gear carrier
assembly (8).
(7)
Remove screw (11) from sun gear (10).
(8)
Remove jet extractor.
(9)
Remove sun gear (10) and muff (12) from
ring gear carrier assembly (8).
NOTE
Perform Step (10) only if studs
are damaged.
(10)
Remove eight studs (3) from ring gear
carrier assembly (8).
b.
Installation.
Adhesives, solvents and sealing
compounds can burn easily, can
give off harmful vapors and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
NOTE
Perform Steps (1) and (2) only if studs were removed.
(1)
Coat threads of eight studs (3) with sealing compound.
(2)
Install eight studs (3) in ring gear carrier assembly (8).
(3)
Install muff (12) and sun gear (10) in ring gear carrier assembly (8).
(4)
Position jet extractor between teeth of sun gear (10) and teeth of ring gear carrier assembly (8).
(5)
Coat screw (11) with sealing compound.
(6)
Install screw (11) in sun gear (10). Tighten screw to 135 to 165 lb-ft (183 to 223 N.m).
(7)
Install end cap (9) on sun gear (10).
|
