|
| |
TM 9-2320-364-34-4
25-22
25-7. AXLE NO. 1, 2 AND 5 WHEEL HUB ASSEMBLY REPAIR (CONT).
b.
Disassembly.
(1)
Remove oil seal (1) from wheel hub (2). Discard oil seal.
(2)
Remove bearing (3) from wheel hub (2).
(3)
Remove bearing races (4) and (5) from wheel hub (2).
Use care when removing retaining rings. Retaining rings are under tension and can act as
projectiles when released causing injury to personnel.
(4)
Remove snap ring (6), outside ring (7), seals (8) and (9) and guide ring (10) from wheel hub (2).
Discard seals and snap ring.
NOTE
Perform Steps (5) and (6) only if studs are damaged.
Four studs are longer than the other six studs to retain wheel cover. Note location of these
studs for proper assembly.
(5)
Remove studs (11) from wheel hub (2).
(6)
Remove studs (12) from wheel hub (2).
|
