|
| |
TM 9-2320-364-34-4
25-26
25-7. AXLE NO. 1, 2 AND 5 WHEEL HUB ASSEMBLY REPAIR (CONT).
(7)
Position lockwasher (4) on pivot and spindle assembly (6).
(8)
With the aid of an assistant and using socket, install spindle nut (5) on pivot and spindle assembly (6).
Tighten spindle nut to 247 lb-ft to 290 lb-ft (335-393 N.m).
(9)
Remove wheel nuts (2) from studs (3).
(10)
Remove lifting device from wheel hub assembly (1).
(11)
Rotate wheel hub assembly (1) while tapping on wheel hub assembly with soft face hammer, until wheel
hub assembly is fully seated.
(12)
With the aid of an assistant, recheck tightness of spindle nut (5) on pivot and spindle assembly (6) and
tighten to 247 lb-ft to 290 lb-ft (335-393 N.m).
(13)
With the aid of an assistant, use socket to unscrew spindle nut (5) a minimum of 1/16 of a turn or until
two locking tabs of lockwasher (4) are aligned with cutouts of spindle nut.
(14)
Bend two locking tabs of lockwasher (4) into cut outs on spindle nut (5).
f.
Follow-On Maintenance:
Install planetary hub gear, (Para 25-6).
END OF TASK
|
