|
| |
TM 9-2320-364-34-4
25-28
25-8. AXLE NO 1, 2 AND 5 BRAKE ASSEMBLY REPLACEMENT (CONT).
Brake assembly weighs 80 lbs (36 kg). Attach suitable lifting device prior to removal to
prevent possible injury to personnel.
(2)
Attach lifting device to brake assembly (2).
(3)
Remove 16 screws (3) from brake assembly (2) and pivot and spindle assembly (1).
(4)
Remove brake assembly (2) from pivot and spindle assembly (1).
(5)
Remove lifting device from brake assembly (2).
b.
Installation.
(1)
Wrap cleaning cloth around spindle of pivot and spindle assembly (1) to protect spindle races.
Adhesives, solvents and sealing compounds can burn easily, can give off harmful vapors
and are harmful to skin and clothing. To avoid injury or death, keep away from open fire
and use in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and water.
(2)
Coat end threads of 16 screws (3) with sealing compound.
(3)
Attach lifting device to brake assembly (2).
(4)
Position brake assembly (2) onto pivot and spindle assembly (1).
(5)
Align matchmarks on brake assembly (2) and pivot and spindle assembly (1).
(6)
Install 16 screws (3). Tighten screws to 181 to 210 lb-ft (245 to 285 N.m).
|
