|
| |
TM 9-2320-364-34-4
25-47
c.
Assembly.
Adhesives, solvents and sealing
compounds can burn easily, can
give off harmful vapors and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(1)
Coat mating surface of spindle (2) with
sealing compound.
(2)
Using press, install seal race (3) on
spindle (2).
(3)
Install spindle ring (1) on spindle (2).
d.
Installation.
(1)
Install steering stop bolt (15) and nut (16) to
pivot and spindle assembly (5).
(2)
Apply light coat of grease on bearing (14).
(3)
Install bearing (14) to pivot and spindle
assembly (5).
(4)
Apply light coat of grease to seal (13).
(5)
Install seal (13) to pivot and spindle
assembly (5).
|
