|
| |
TM 9-2320-364-34-4
25-53
(3)
Remove constant velocity joint (4) from axle
housing (5).
(4)
Remove seal (6) from axle housing (5).
Discard seal.
Use care when removing
retaining rings. Retaining rings
are under tension and can act as
projectiles when released
causing injury to personnel.
(5)
Remove retaining ring (7) from axle
housing (5). Discard retaining ring.
(6)
Using puller, remove bearing (8) from axle
housing (5). Discard bearing.
(7)
Remove two grease fittings (9) from
block (10). Discard grease fittings.
Use care when removing
retaining rings. Retaining rings
are under tension and can act as
projectiles when released
causing injury to personnel.
(8)
Remove two retaining rings (11) from
block (10). Discard retaining rings.
(9)
Remove two retaining rings (10) from
shaft (12). Discard retaining rings.
(10)
Remove two screws (13) from caps (14).
Discard screws.
(11)
Using inertial extractor and adapter, remove
two caps (14) from cross (15) and block (10).
Discard caps.
|
