|
| |
TM 9-2320-364-34-4
25-79
This task covers:
a. Removal
c. Cleaning/Inspection
e. Installation
b. Disassembly
d. Assembly
f. Follow-On Maintenance
INITIAL SETUP
Personnel Required
Two
Equipment Condition
Rear output assembly removed, (Para 25-14)
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Adapter, Maintenance Stand, Differential
(Item 3, Appendix F)
Compressor Unit, Air (Item 35, Appendix F)
Gage, Depth, Micrometer (Item 73, Appendix F)
Gloves, Chemical Oil Protective
(Item 81, Appendix F)
Goggles, Industrial (Item 83, Appendix F)
Gun, Airblow (Item 86, Appendix F)
Hammer, Hand, Soft Plastic
(Item 88, Appendix F)
Indicator, Dial, Set w/Magnetic Base
(Item 98, Appendix F)
Micrometer, Outside, Caliper Set
(Item 139, Appendix F)
Multiplier, Torque (Item 141, Appendix F)
Press, 60 Ton (Item 164, Appendix F)
Puller Kit, Universal, Slide Hammer
(Item 175, Appendix F)
Socket, 63 mm (Item 218, Appendix F)
Stand, Maintenance, Engine
(Item 226, Appendix F)
Torch, Propane (Item 247, Appendix F)
Wrench Set, Socket, 3/8 in. Drive
(Item 273, Appendix F)
25-16. AXLE NO. 2 DIFFERENTIAL ASSEMBLY REPAIR.
Materials/Parts
Adhesive (Item 1, Appendix B)
Dye, Prussian Blue (Item 20, Appendix B)
Grease (Item 22, Appendix B)
Sealing Compound (Item 59, Appendix B)
Sealing Compound (Item 60, Appendix B)
Solvent, Dry Cleaning (Item 68, Appendix B)
Wire, Nonelectrical (Item 79, Appendix B)
Locknut (16) (Item 215, Appendix E)
Nut, Adjusting (Item 307, Appendix E)
Seal, Oil (Item 598, Appendix E)
Shim Kit, Adjusting (2) (Item 639, Appendix E)
Shim Kit, Adjusting (Item 640, Appendix E)
Shim Kit, Adjusting (Item 641, Appendix E)
Tools and Special Tools - Continued
Wrench, Torque (0-60 N.m)
(Item 276, Appendix F)
Wrench, Torque (0 to 175 lb-ft [0-237 N.m])
(Item 277, Appendix F)
Wrench, Torque (0 to 600 lb-ft [0-814 N.m])
(Item 278, Appendix F)
Lifting Device, Minimum Capacity 450 lbs
(204 kg)
Extractor, Jet (Appendix C)
Holder, Flange (Appendix C)
Adapter, Differential Preload (Appendix C)
|
