|
| |
TM 9-2320-364-34-4
25-98
25-16. AXLE NO. 2 DIFFERENTIAL ASSEMBLY REPAIR (CONT).
(72)
Using depth gage, measure and record distance “A” on front housing (13).
(73)
Using depth gage, measure and record distance “B” on cover (11).
(74)
Assemble adjusting shim (12) to a thickness of A – B 0.002 in. (0.051 mm).
(75)
Install adjusting shim (12) in front housing (13).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
(76)
Coat mating surface of front housing (13)
with sealing compound.
(77)
Coat threads of screws (9) and (10) with
sealing compound.
(78)
Install cover (11) on front housing (13)
with screw (9) and five screws (10).
Tighten screw (9) to 44 lb-ft (60 N.m) and
five screws (10) to 56 lb-ft (76 N.m).
(79)
Check split torque (17) for free rotation. If
split torque does not rotate freely, repeat
Steps (72) through (76).
|
