|
| |
TM 9-2320-364-34-4
25-112
25-19. AXLE NO. 3 AND 4 PLANETARY HUB GEAR REPLACEMENT (CONT).
(5)
Remove end cap (9) from sun gear (10).
(6)
Position jet extractor between teeth of sun
gear (10) and teeth of ring gear carrier
assembly (8).
(7)
Remove screw (11) from sun gear (10).
Remove jet extractor.
(8)
Remove sun gear (10) and muff (12) from
ring gear carrier assembly (8).
NOTE
Perform Step (9) if studs are
damaged.
(9)
Remove eight studs (3) from ring gear
carrier assembly (8).
b.
Installation.
Adhesives, solvents and sealing compounds can burn easily, can give off harmful vapors and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
NOTE
Perform Steps (1) and (2) if studs were removed.
(1)
Coat threads of eight studs (3) with sealing compound.
(2)
Install eight studs (3) in ring gear carrier assembly (8).
(3)
Install muff (12) and sun gear (10) in ring gear carrier assembly (8).
(4)
Position jet extractor between teeth of sun gear (10) and teeth of ring gear carrier assembly (8).
(5)
Coat screw (11) with sealing compound.
(6)
Install screw (11) in sun gear (10). Tighten screw to 135 to 165 lb-ft (183 to 224 N.m). Remove jet
extractor.
(7)
Install end cap (9) on sun gear (10).
|
