|
| |
TM 9-2320-364-34-4
20-31
(2)
Remove nut (5), ferrule (6) and ether
tube (7) from atomizer (8).
(3)
Remove atomizer (8) from air inlet
housing (9).
(4)
Remove ether tube (7) from engine (10).
Discard nut, ferrule and tube, if cut.
NOTE
Studs may come out with
locknuts.
If stud stays with bottom
right locknut, clamp on
turbocharger may have to be
moved to remove stud.
(5)
Remove four locknuts (11), washers (12),
adapter tee (13) and gasket (14) from
turbocharger assembly (4). Discard gasket
and locknuts.
NOTE
Perform Step (6) to remove
studs only if studs are damaged.
(6)
Remove studs (15) from adapter (13) or
turbocharger assembly (4).
(7)
Remove screw (16) lockwasher (17),
washer (18) and clip (19). Discard
lockwasher.
|
