| |
TM 9-2320-364-34-4
25-151
Use care when removing
retaining rings. Retaining rings
are under tension and can act as
projectiles when released
causing injury to personnel.
(6)
Remove retaining ring (4) from fork (5).
(7)
Remove clutch gear (6) from fork (5).
(8)
Remove two finger forks (7) from fork (5).
NOTE
Fork pin is tapered and can only
be removed one way. Fork pin
must be removed from larger
hole.
(9)
Punch out fork pin (8) and remove fork (5).
(10)
Using spanner socket, remove spanner
nut (9) from cover (10). Discard spanner
nut.
(11)
Remove six screws (11) from cover (10).
(12)
Using puller, remove cover (10) from
differential assembly (12).
(13)
Using press, press bearing (13) from
cover (10).
(14)
Remove fork (14), gear (15) and spring (16)
from differential assembly (12).
|