|
| |
TM 9-2320-364-34-4
25-155
(36)
Unstake spanner nut (47) from pinion
shaft (1).
(37)
Using spanner socket, remove spanner
nut (47) from ring and pinion assembly (38).
Discard spanner nut.
Ring and pinion assembly weighs
60 lbs (27 kg). Attach a suitable
lifting device prior to removal to
prevent possible injury to
personnel.
(38)
Attach lifting device to ring and pinion
assembly (38).
(39)
Remove ring and pinion assembly (38)
from housing (26).
(40)
Remove lifting device from ring and pinion
assembly (38).
Use care when removing
retaining rings. Retaining rings
are under tension and can act as
projectiles when released causing
injury to personnel.
(41)
Remove deflector (48), retaining ring (49),
adjusting shim (50) and bearing (51) from
ring and pinion assembly (38). Measure
and record thickness of adjusting shim then
discard.
|
