|
| |
TM 9-2320-364-34-4
25-177
NOTE
Perform Steps (10) and (11) if
studs were removed.
(10) Coat threads of four studs (9) with sealing
compound.
(11) Install four studs (9) in differential
assembly (6). Tighten studs to 76 lb-ft
(103 N.m).
(12) Install screw (27) and wire to secure
fork (28) in the locked position.
NOTE
Perform Steps (13) and (14) if
studs were removed.
(13)
Apply sealing compound to studs (13).
(14)
Install ten studs (13) in axle housing (15).
Tighten studs to 76 lb-ft (103 N.m).
Differential assembly weighs 500
lbs (227 kg). Attach suitable
lifting device prior to installation
to prevent possible injury to
personnel.
(15)
Attach lifting device to flange assembly (14).
(16)
With the aid of an assistant, remove six
screws (18) and nuts (19) from differential
assembly and differential adapter.
|
