|
| |
TM 9-2320-364-34-4
27-4
27-2. 2.21:1 GEAR REDUCER REPAIR (CONT).
NOTE
Both housing halves are repaired
the same way.
(11) Remove two bearing cups (12) and oil
seals (13) from input housing (1) and output
housing (2). Discard oil seals.
NOTE
Perform Step (12) if plugs are
damaged.
(12)
Remove plugs (14) from input housing (1)
and output housing (2).
NOTE
Preform Steps (13) and (14) for
output shaft. Perform Step (15)
for input shaft.
(13)
Remove cone bearings (15) from output
shaft (16).
(14)
Remove key (17), gear (18) and two
spacers (19) from output shaft (16).
|
