|
| |
TM 9-2320-364-34-4
27-21
Materials/Parts
Grease (Item 21, Appendix B)
Oil, Hydraulic (Item 34, Appendix B)
Sealing Compound (Item 56, Appendix B)
Solvent, Drycleaning (Item 68, Appendix B)
Intermediate Steering Gear Repair Kit
(Item 134, Appendix E)
Kit, Plug (2) (Item 146, Appendix E)
Lockwasher (8) (Item 229, Appendix E)
Lockwasher (4) (Item 230, Appendix E)
Lockwasher (10) (Item 251, Appendix E)
Screw, Self Locking (Item 557, Appendix E)
This task covers:
a. Disassembly
b. Cleaning/Inspection
c. Assembly
INITIAL SETUP
Equipment Condition
Intermediate steering gear on clean work surface
Tools and Special Tools
Tool Kit, General Mechanic’s
(Item 240, Appendix F)
Compressor Unit, Air (Item 35, Appendix F)
Drill Machine, Upright (Item 47, Appendix F)
Drill Set, Twist (Item 48, Appendix F)
Gloves, Chemical Oil Protective
(Item 81, Appendix F)
Goggles, Industrial (Item 83, Appendix F)
Gun, Airblow, (Item 86, Appendix F)
Hammer, Hand, Soft Plastic
(Item 88, Appendix F)
Pan, Drain (Item 145, Appendix F)
Press, 60 Ton (Item 164, Appendix F)
Puller Kit, Universal (Item 174, Appendix F)
Vise, Chain, Pipe (Item 249, Appendix F)
Wrench, Torque (0 to 175 lb-ft [0-237 N.m])
(Item 277, Appendix F)
27-4. INTERMEDIATE STEERING GEAR REPAIR
a.
Disassembly.
(1)
Position steering gear assembly (1) in chain
vise.
(2)
Remove dust cap (2) from cover (3).
(3)
Remove eight screws (4) and
lockwashers (5) from cover (3). Discard
lockwashers.
(4)
Using soft face hammer tap back end of
shaft (6) to remove cover (3) and shaft (6)
from steering gear assembly (1).
(5)
Remove preformed packing (7) from
cover (3). Discard preformed packing.
|
