| |
TM 9-2320-364-34-4
27-27
c.
Assembly.
NOTE
Perform Step (1) if grease fitting
was removed.
(1)
Install grease fitting (38) in bearing
cap (18).
(2)
Install ball (37), set screw (36) and cap (35)
in bearing cap (18) and cylinder head (14).
NOTE
Perform Steps (3) through
(12) if seals and actuating
shaft were removed.
Backup washer must be
installed with undercut
facing outside of bearing
cap.
(3)
Install backup washer (33) in bearing
cap (18).
36
37
14
35
35
36
37
18
38
|