|
| |
TM 9-2320-364-34-4
27-31
NOTE
Apply a light coat of hydraulic
fluid on the piston assembly and
in the piston bore.
(23)
Install piston assembly (19) and bearing
cap (18) in bore of steering gear assembly
(1).
(24)
Align matchmarks and install bearing cap
(18) on steering gear assembly (1) with
four lockwashers (17) and screws (16).
Tighten screws to 145 lb-ft (197 N.m).
(25)
Apply hydraulic oil to preformed
packing (15).
(26)
Install preformed packing (15) on cylinder
head (14).
(27)
Align matchmarks and install cylinder head
(14) on steering gear assembly (1) with ten
lockwashers (13) and screws (12). Tighten
screws to 53 to 63 lb-ft (72 to 85 N.m).
|
