|
| |
TM 9-2320-364-34-4
28-7
c.
Assembly.
NOTE
Position seal assembly as noted
prior to removal.
(1)
Apply hydraulic oil to seal assembly (35)
and install on piston (33).
Do not clamp on machined
surface of cylinder rod or damage
will result. Clamp on welded
boss portion of cylinder rod.
(2)
Position cylinder rod (21) in chain vise with
wooden blocks
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(3)
Coat threads of cylinder rod (21) with
sealing compound.
(4)
Install piston (33) on cylinder rod (21) until
setscrew holes line up.
(5)
Coat threads on setscrew (34) with sealing
compound.
(6)
Install setscrew (34) in piston (33) and
cylinder rod (21).
(7)
Apply hydraulic oil to seal assembly (32)
and install on piston (33).
|
