| |
TM 9-2320-364-34-4
28-17
NOTE
Install seal as noted prior to
removal.
(11) Apply hydraulic oil to split seal (19), piston
seal assembly (20) and split seal (19) and
install on piston (21).
(12) With the aid of an assistant, install cylinder
rod (18) in cylinder barrel (16).
(13)
Install cylinder head (17) in cylinder
barrel (16).
(14)
Remove 0.38-16 screw and align set screw
hole in cylinder rod (18) to hole in cylinder
head (17).
(15)
Push cylinder rod (18) into cylinder
barrel (16) to cylinder head (17).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
(16)
Apply sealing compound to threads of
setscrew (15) and install in cylinder barrel
(16).
|