| |
TM 9-2320-364-34-4
28-32
28-7. HOIST ASSEMBLY REPAIR (CONT).
(9)
Remove spur gear (16) and planetaries (17)
and (18) from ring gear (11).
Use care when removing
retaining rings. Retaining rings
are under tension and can act as
projectiles when released causing
injury to personnel.
NOTE
Use care when removing gear, or
rollers may fall.
(10)
Remove lock ring (19), shaft (20), two
washers (21), gear (22) and 17 needle
bearings (23). Discard lock ring.
(11)
Repeat Step (10) for two remaining
gears (22).
(12)
Remove retaining ring (24) and drive
gear (25) from planetary (17). Discard
retaining ring.
(13)
Remove retaining ring (24) from drive
gear (25). Discard retaining ring.
|