|
| |
TM 9-2320-364-34-4
28-45
NOTE
Disc and spacers may drop when
brake is removed.
(8)
Remove brake (8) from swing drive
assembly (12).
(9)
Remove spacer (13), disc (14), spacer (15)
and disc (16) from swing drive assembly (12).
(10)
Remove two plugs (17) from swing drive
gear reducer (18) and drain oil in drain pan.
(11)
Matchmark length of swing drive gear
reducer (18) and place gear side down on
wooden blocks.
(12)
Remove 16 screws (19) and lockwashers
(20) from swing drive gear reducer (18).
Discard lockwashers.
NOTE
Number of shims may vary.
(13)
Remove end cover (21) and shims (22)
from swing drive gear reducer (18).
(14)
Remove oil seal (23) from end cover (21).
Discard oil seal.
|
