| |
TM 9-2320-364-34-4
28-48
28-9. SWING DRIVE GEAR REDUCER REPAIR (CONT).
(26)
Remove inner planetary assembly (42) from
swing drive gear reducer (18).
(27)
Drive spring pin (43) into pin (44).
(28)
Remove pin (44), gear (45) and two
spacers (46).
(29)
Remove spring pin (43) from pin (44).
Discard spring pin.
NOTE
Handle bearing with care or
individual needles may be lost.
(30)
Remove bearing (47) from gear (45).
(31)
Repeat steps (27) through (30) for other two
assemblies.
(32)
Remove center spacer (48) from carrier (49).
|