Installation. -725550632

TM 9-2330-385-14

4-27. FRONT/REAR SIDE MARKER LIGHT/BRACKET REPLACEMENT (CONT).

NOTE

Wire numbers are different between left and right sides. Left side is shown.

Perform Steps (c) through (e) for left light. Perform Steps (f) through (h) for right

light.

Tag and mark all wires prior to removal.

(c)

Disconnect 1012-24 connector (6) from 489 connector (7).

(d)

Remove locknut (8), wire 1435-23 (9)

and screw (10) from lens support (3).

Discard locknut.

(e)

Remove locknut (11), screw (12) and

lens support (3) from bracket (13).

(f)

Disconnect 1012-14 connector (6) from

489 connector (7).

(g)

Remove locknut (8), wire 1435-13 (9)

and screw (10) from lens support (3).

Discard locknut.

(h)

Remove locknut (11), screw (12) and

lens support (3) from bracket (13).

Discard locknut.

(i)

Remove two locknuts (14), screws (15),

washers (16), mounts (17) and (18) and

bracket (13) from trailer arm (19).

Discard locknuts and mounts.

(2)

Installation.

(a)

Install bracket (13) on trailer arm (19)

with mounts (18) and (17),

washers (16), screws (15) and

locknuts (14).

(b)

Tighten locknuts (14) until two

mounts (18) and (17) are compressed

to 1/4 in. (6.35 mm).

4-340