 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2330-385-14
4-29. REAR COMPOSITE LIGHT REPAIR (CONT).
Assembly.
d.
NOTE
If installing LED composite
light, perform Step (1).
If installing composite light,
perform Steps (2) through (9).
Route connectors through
housing.
(1)
Install LED composite light ground wire
pigtail (16) on LED composite light ground
wire (17).
Corrosion inhibitor contains
alkali. Do not get in eyes; wear
goggles/safety glasses when
using. Avoid contact with skin.
In case of contact, immediately
wash area with soap and water.
If eyes are contacted, flush eyes
with large amounts of water for
at least 15 minutes and get
immediate medical attention.
(2)
Apply anti-corrosion silicone compound to
inside of socket (15), socket (12), socket (7)
and socket (8).
(3)
Install blackout light (13) in socket (15).
(4)
Lock blackout light (13) in place by pushing
in and turning slot (14) to the right.
(5)
Install blackout brake light (10) in
socket (12).
(6)
Install blackout brake light (10) in place by
pushing in and turning slot (11) to the right.
(7)
Close door (9) on blackout brake light (10).
(8)
Install lamps (5) and (6) in sockets (7) and (8).
(9)
Install preformed packing (3) and housing
cover (2) on housing (4) and tighten six
screws (1).
4-350
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals