Rear Side Marker Harness (Right Side) Replacement.

TM 9-2330-385-14

4-30. WIRE HARNESS REPLACEMENT (CONT).

(f)

Position wire 1435-25 (2) on terminal 1435-25 (5) and tighten screw (1).

(g)

Position wire 1012-26 (3) on terminal 1012-26 (4) and tighten screw (1).

Refer to Subparagraph b. and install rear electrical box cover.

(h)

Rear Side Marker Harness (Right Side) Replacement.

NOTE

Tag and mark all wires prior to removal.

Remove cable ties as required.

(1)

Removal.

Refer to Subparagraph b. and remove rear electrical box cover.

(a)

(b)

Loosen two screws (1) and remove wire 1012-40 (2) and wire 1435-39 (3) from terminal 1012-40

(4) and terminal 1435-39 (5).

4-372