Installation. -725550682

TM 9-2330-385-14

4-30. WIRE HARNESS REPLACEMENT (CONT).

(c)

Loosen cable nut (10) and pull

cable (11) out of rear electrical

box (12).

(d)

Remove locknut (13) and box

connector (14) from rear electrical

box (12).

(e)

Disconnect wire 1012-31 (2), wire 1012-32 (3) and wire 1012-33 (4) from wire 489 (15), wire 489 (16)

and wire 459 (17).

(f)

Remove two screws (18) and lens cover (19) from center marker light (20).

(g)

Remove screw (21), locknut (22) and wire 1435-34 (5) from marker light bracket (23). Discard

locknut.

(2)

Installation.

NOTE

Install cable ties as required.

(a)

Install wire 1435-34 (5) on marking light (20) with locknut (22) and screw (21).

(b)

Install lens cover (19) on center marker light (20) with two screws (18).

(c)

Install wire 1012-31 (2), wire 1012-32 (3) and wire 1012-33 (4) on wire 489 (15), wire 489 (16) and

wire 459 (17).

4-376