 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2330-385-14
4-31. 12 VOLT AND 24 VOLT TRAILER LIGHT CABLE REPAIR (CONT).
(d)
Remove sleeve (10), collar (11), washer (12), spring washer (13) and gasket (14) from connector
(7).
NOTE
Tag and mark all wires prior to removal.
(e)
Remove wire (15) and terminal (16) from connector (7).
NOTE
Cut as close to damaged terminal as possible.
(f)
Cut off terminal (16) at end of wire (15). Remove insulation (17) 1/4 inch (.635 cm) from end of
wire (15). Discard terminal.
(2)
Assembly.
(a)
Install heat shrink (8) to end of cable
7
(9).
(b)
Install terminal (16) on wire (15).
(c)
Install terminal (16) on connector (7).
(d)
Install gasket (14), spring washer (13),
3
washer (12), collar (11) and sleeve (10)
2
9
on connector (7).
8
4
5
6
1
(e)
Install seal (6), grommet (5) and nut (4) on
connector (7).
(f)
Install two cable clamps (3) on nut (4) with
two lockwashers (2) and screws (1).
4-396
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals