Installation. -725550792

TM 9-2330-385-14

4-44. DRAWBAR AIR ASSIST CONTROL REPLACEMENT (CONT).

Installation.

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors and

are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use

in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,

wash immediately with soap and water.

Use sealing compound sparingly and only on threads. Do not apply compound on hose

connections. Damage to equipment may result.

NOTE

Perform Steps (1) through (8) for Model A.

(1)

Apply sealing compound on threads of

plug (15).

(2)

Install plug (15) in valve (10).

(3)

Apply sealing compound on threads of

reducers (12), (13) and (14).

(4)

Install reducers (12), (13) and (14) on valve

(10).

(5)

Apply sealing compound on threads of

elbows (4), (5) and (6).

(6)

Install elbows (4), (5) and (6) on reducers

(12), (13) and (14).

(7)

Install valve (10) on turntable (11) with two

screws (7), lockwashers (8) and washers (9).

(8)

Install air lines 2225 (1), 2228 (2) and 2226

(3) on elbows (4), (5) and (6).

4-2 2

-458.