Installation. -725550825

TM 9-2330-385-14

(3)

Remove two elbows (4) and (5) and fitting (6) from quick release valve (9).

Installation.

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors and

are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use

in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,

wash immediately with soap and water.

Use sealing compound sparingly and only on threads. Do not apply compound on hose

connections. Damage to equipment may result.

(1)

Apply sealing compound on threads of

fitting (6).

(2)

Install fitting (6) on quick release valve (9).

(3)

Apply sealing compound on threads of

elbow (5).

(4)

Install elbow (5) on quick release valve (9).

(5)

Apply sealing compound on threads of

elbow (4).

(6)

Install elbow (4) on quick release valve (9).

(7)

Install quick release valve (9) on

bracket (10) with two screws (8) and

locknuts (7).

(8)

Install air lines 2260 (1), 2660 (2) and

2639 (3) on elbows (4) and (5) and

fitting (6).

Follow-On Maintenance:

Charge air system, (Para 2-22).

Check for air leaks, (Para 4-7).

Remove wheel chocks, (Para 2-20).

END OF TASK

4-491