Installation. -725550900

TM 9-2330-385-14

4-67. FLATRACK AIR CHAMBER REPLACEMENT (CONT).

Installation.

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors and

are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use

in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,

wash immediately with soap and water.

Use sealing compound sparingly and only on threads. Do not apply compound on hose

connections. Damage to equipment may result.

NOTE

If installing right side load lock air chamber, install elbow. If installing left side load lock air

chamber, install T-fitting.

(1)

Apply sealing compound on threads of

elbow (18) or T-fitting (17).

(2)

Install elbow (18) or T-fitting (17) on load

lock air chamber (4).

NOTE

Perform Step (3) if clevis

was removed.

Install clevis in position

noted prior to removal.

(3)

Install clevis (13) on push rod (23). Tighten

locking nut (22).

(4)

Install load lock air chamber (4) on

frame (21) with two washers (20) and

locknuts (19).

4-556