 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2330-385-14
Adhesives, solvents and sealing
compounds can burn easily, can
give off harmful vapors and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
20
22
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
(5)
Apply adhesive sealant on end of tube
assembly (20).
(5.1) Apply sealing compound to threads of six
screws (17).
25
13
63
19
18
(6)
Position safety arm (25) through retaining
17
guide (13) and install plate (19) on tube
assembly (20) with six screws (17) and
lockwashers (18).
(7)
Remove adjusting pin (22) and position tube
assembly (20) in retracted position.
15
(8)
Install adjusting pin (22) and raise hinge
assembly locking latch (63) into locked
position.
14
16
(9)
Tighten four locknuts (15) on screws (14)
and two clamps (16).
LIFTING
DEVICE
21
(10)
Remove lifting device from drawbar
extension assembly (21).
4-607
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals