 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2330-385-14
Allow adhesives to dry
completely prior to soldering.
Solder and soldering tool become
extremely hot. Failure to follow
proper procedures could cause
serious injury or death to
personnel.
(e)
Solder wires (3) to resistor (4).
(f)
Slide heat shrink (1) forward over
wires (3).
(g)
Apply heat to heat shrink (1).
(h)
Repeat Steps (a) through (g) for the
other resistors (4).
c.
Circuit Board Replacement.
(1)
Removal.
NOTE
Tag and mark all wires
prior to removal.
(a)
Remove heat shrink (1) from wires (2)
and (3).
(b)
Remove wires (2) and (3) from
resistor (4).
(c)
Remove heat shrink (1) from wires (5)
and (6).
(d)
Remove wires (5) and (6) from
resistor (7).
(e)
Remove heat shrink (1) from wires (8)
and (9).
(f)
Remove wires (8) and (9) from
resistor (10).
(g)
Remove heat shrink (1) from
wires (11) and (12).
(h)
Remove wires (11) and (12) from
resistor (13).
5-25
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals