 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2330-385-14
5-24. EXTENDED DRAWBAR/LIGHT BAR KIT INSTALLATION (CONT).
NOTE
Steps (42) through (57) were
deleted.
46
47
(42)
Disconnect 24 volt cable (46) from
receptacle (47).
(43)
Remove locknut (48), screw (49) and twist
bracket (50) from clamp (51). Discard
locknut.
(44)
Remove clamp (51) from 24 volt cable (46).
NOTE
Clamp is properly installed
when positioned on
50
twentieth coil from trailer
49
end of 24 volt cable.
51
12 pin, 24 volt cable in Steps
(45) and (53) is from extended
46
drawbar/light bar kit.
(45)
Install clamp (51) on trailer end of 24 volt
cable (46).
48
(46)
Install twist bracket (50) on clamp (51) with
screw (49) and locknut (48).
(47)
Remove safety valve (52) from elbow (53).
52
53
Adhesives, solvents and sealing
compounds can burn easily,
can give off harmful vapors and
are harmful to skin and clothing.
To avoid injury or death, keep
away from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
NOTE
Safety valve in Steps (48) and (49)
is from extended drawbar/light bar
kit.
(48)
Apply sealing compound on threads of
safety valve (52).
(49)
Install safety valve (52) on elbow (53).
5-96
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals