Removal. (Cont) -725551061

TM 9-2330-385-14

Turntable bearing weighs 135 lbs

(61 kg). Attach a suitable lifting

device prior to installation to

prevent possible injury to

personnel.

(18)

Attach lifting device and four lifting eyes to

turntable bearing (9).

(19)

With the aid of an assistant, remove

turntable bearing (9) from turntable (1).

(20)

Remove lifting device and four lifting eyes

from turntable bearing (9).

CARC paint contains isocyanate (HDI) which is highly irritating to skin and respiratory

system. High concentrations of HDI can produce symptoms of itching and reddening of

skin, a burning sensation in throat and nose and watering of the eyes. In extreme

concentrations, HDI can cause cough, shortness of breath, pain during respiration,

increased sputum production and chest tightness. The following precautions must be

taken whenever using CARC paint:

NEVER weld or cut CARC-coated materials.

NOTE

If a new turntable is to be

installed, new plates will

need to be welded to new

turntable. Perform Steps

(21) and (22).

If a new bearing is to be

installed, new plates will

have to be installed on

trailer and turntable.

Perform Steps (21) and (24).

(21)

Using a wire brush, remove CARC paint

from area four in. (102 mm) around

welding/grinding points.

(22)

Grind off welds from retainer plates (14) and

remove plates from turntable (1).

6-11