|
|
TM 9-3990-206-14&P
(20)
Attach one lifting strap (1) from left to right, to two rear tiedown rings (5) on flatrack (14).
(21)
Attach lifting strap (1) to tiedown ring (6) at rear of flatrack (14).
Ensure pads on lifting straps are positioned in lifting clevis of MHC. Failure to comply may
result in breakage of lifting straps causing severe injury or death to personnel.
(22)
Attach two lifting straps (1) to MHC (7).
Ensure boom of MHC is positioned directly over center of flatrack prior to lifting flatrack off
ground. Failure to comply may result in uneven lifting of flatrack and damage to equipment
may result.
NOTE
If flatrack is not raised level, Perform Steps (23) through (26). If flatrack is level, go to
Step (27).
(23)
Raise flatrack (14) until flatrack clears ground and ensure flatrack is level.
(24)
Lower flatrack (14) to ground.
(25)
Shorten or lengthen two lifting straps (1) as required.
(26)
Repeat Steps (23) through (25) until flatrack is level when raised.
2-25
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |