Table 7-1. Operator's Preventive Maintenance Checks and Services

TM 9-3990-206-14&P

Table 7-1. Operator's Preventive Maintenance Checks and Services - Continued

Location

Item to

Interval

Procedure

Not Fully Mission

Item

Check/Service

Capable If:

No.

Rear wall weighs 1,200 lbs (545 kg). The flatrack is equipped with spring-

loaded counterbalance mechanisms that allow the wall to be lowered by

two soldiers. Raising and lowering operations must be conducted on level

ground. Do not stand under walls when raising or lowering. Use an assis-

tant when raising or lowering the rear wall to prevent serious injury or

death to personnel.

After

Rear wall hinges

Inspect rear wall hinges (1) for damage or

Any hinge is cracked or

corrosion.

has damage that would

impair operation.

After

Rear wall hinge

Inspect for missing or damaged hinge

Any pin is cracked or

pins

pins (2).

missing or has damage

that would impair

operation.

Pin assemblies

Inspect pin assemblies (3) for damage

Any pin assembly is

After

or corrosion. If pin assemblies are

missing or has damage

corroded or do not operate freely, notify

that would impair

Unit Maintenance.

operation.

Mud flaps

Inspect for missing or damaged mud

After

flaps (4).

7-7