 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-3990-206-14&P
9
1
8
12
3
2
10
11
7
(4)
Position two nuts (12) on threaded rods (3).
(5)
Position two springs (8) on flatrack (1).
Adhesives, solvents and sealing compounds can burn easily, can give off harmful vapors
and are harmful to skin and clothing. To avoid injury or death, keep away from open fire
and use in well-ventilated area. If adhesive, solvent or sealing compound gets on skin or
clothing, wash immediately with soap and water.
(6)
Apply sealing compound to threads of four screws (10).
(7)
Install removable crossmember (11) on flatrack (1) with four screws (10). Tighten screws to 35 lb-ft. (47
Nm).
(8)
Apply sealing compound to threads of four nuts (9).
9
4
5
(9)
Install clevis (7) on springs (8) with four nuts (9).
7
(10)
Position two threaded rods (3) through
removable crossmember (11).
8
(11)
Position two nuts (2) on threaded rods (3).
(12)
Install chain (6) on clevis (7) with pin (5)
and two cotter pins (4).
6
(13)
Adjust springs. Refer to Para 9-18.
9-35
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals