 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-3990-206-14&P
9-20. PULLEY AND ROLLER REPLACEMENT (CONT).
(2)
Remove spring pin (5), pin (6) and roller (7)
6
from bracket (4). Discard spring pin.
(3)
Position roller (7) in vise.
NOTE
Note position of seals prior to
4
removal.
(4)
Remove and discard two seals (8) from
5
roller (7).
7
NOTE
Perform Steps (5) through (7) only
if bushing is damaged.
(5)
Position roller (7) in press.
NOTE
8
Note position of bushing prior to
7
removal.
9
(6)
Remove and discard bushing (9) from
8
roller (7).
(7)
Remove roller (7) from press.
b.
Installation.
NOTE
Perform Steps (1) through (3) only
if bushing was removed.
(1)
Position roller (7) in press.
NOTE
Install bushing in position as noted
during removal.
(2)
Install bushing (9) in roller (7).
6
(3)
Remove roller (7) from press.
NOTE
Install seals in position as noted
during removal.
(4)
Install two seals (8) in roller (7).
4
(5)
Remove roller (7) from vise.
(6)
Install roller (7) on bracket (4) with pin (6)
5
and spring pin (5).
7
9-46
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals