Figure 5. Removing the Skid Plate.
c. Remove two screws (3), washers (4), and nuts (5) from the Skid Plate.
d. Remove 15 of the 17 screws (6, 7) from the Skid Plate (8), loosening but leaving in
two screws (6), one on each side, at the top edge of the Skid Plate (8).
e. While two personnel hold the Skid Plate, remove the two remaining screws (6), and
remove the Skid Plate (8).
7. Remove the Blackout Light and Bracket.
a. Remove mounting bolt, nut, and washer.
b. Unplug wire and remove the Blackout Light and Mounting Bracket.
8. Remove the Bridge Weight Sign from the Skid Plate.
a. Working from the back surface of the Skid Plate, remove the two bolts, lockwashers,
and flat washers that secure the Bridge Weight Sign to the skid plate, and then
remove the Bridge Weight Sign from the Skid Plate.
9. Remove the Side Grab Handle from each side of the cab.